
Micrel, Inc.
KSZ8842-PMQL/PMBL
October 2007
77
M9999-100207-1.5
Port 1 Ingress Rate Control Register (Offset 0x0508): P1IRCR
This register contains the port 1 ingress rate control register for the switch port 1 function.
Bit
Default
R/W
Description
15 – 12
0x0
RW
Ingress Pri3 Rate
Priority 3 frames will be discarded after the ingress rate selected as
shown below, is reached or exceeded:
0000 =Not limited (Default)
0001 = 64 Kbps
0010 = 128 Kbps
0011 = 256 Kbps
0100 = 512 Kbps
0101 = 1 Mbps
0110 = 2 Mbps
0111 = 4 Mbps
1000 = 8 Mbps
1001 = 16 Mbps
1010 = 32 Mbps
1011 = 48 Mbps
1100 = 64 Mbps
1101 = 72 Mbps
1110 = 80 Mbps
1111 = 88 Mbps
Note: For 10Base-T, rate settings above 10Mbps are set to the default
value 0000 (Not limited).
11 – 8
0x0
RW
Ingress Pri2 Rate
Priority 2 frames will be discarded after the ingress rate selected as
shown below, is reached or exceeded:
0000 = Not limited (Default)
0001 = 64 Kbps
0010 = 128 Kbps
0011 = 256 Kbps
0100 = 512 Kbps
0101 = 1 Mbps
0110 = 2 Mbps
0111 = 4 Mbps
1000 = 8 Mbps
1001 = 16 Mbps
1010 = 32 Mbps
1011 = 48 Mbps
1100 = 64 Mbps
1101 = 72 Mbps
1110 = 80 Mbps
1111 = 88 Mbps
Note: For 10Base-T, rate settings above 10Mbps are set to the default
value 0000 (Not limited).